The CGPA to percentage formula
There is no single national rule for turning a CGPA into a percentage. Each board or university decides its own. The two rules students meet most often are these, for a CGPA out of 10:
CBSE rule: Percentage = CGPA × 9.5
VTU rule: Percentage = (CGPA − 0.75) × 10
Take a CGPA of 8.2 under the CBSE rule: 8.2 × 9.5 = 77.9%. Under the simple CGPA × 10 rule that some colleges use, the same CGPA would give 82%. The gap is why the rule matters.
CGPA to percentage converter
Type your CGPA, pick the rule your university uses, and read the percentage. Switch the direction to go from percentage back to CGPA.
Percentage = CGPA × 9.5. Published by CBSE for its 10-point grades and used by many colleges.
CGPA to percentage table (out of 10)
The same CGPAs under each of the three rules. Notice how far apart the answers are at the top of the scale.
| CGPA | CBSE rule: CGPA × 9.5 | VTU rule: (CGPA − 0.75) × 10 | Simple rule: CGPA × 10 |
|---|---|---|---|
| 6.0 | 57% | 52.5% | 60% |
| 6.5 | 61.75% | 57.5% | 65% |
| 7.0 | 66.5% | 62.5% | 70% |
| 7.5 | 71.25% | 67.5% | 75% |
| 8.0 | 76% | 72.5% | 80% |
| 8.5 | 80.75% | 77.5% | 85% |
| 9.0 | 85.5% | 82.5% | 90% |
| 9.5 | 90.25% | 87.5% | 95% |
| 10.0 | 95% | 92.5% | 100% |
How to convert percentage to CGPA
Reverse the rule. For the CBSE rule, divide the percentage by 9.5:
CGPA = Percentage ÷ 9.5
Example: 72% ÷ 9.5 = 7.58 CGPA. For the VTU rule the reverse is CGPA = (Percentage ÷ 10) + 0.75, which gives 7.95 for the same 72%.
Which rule should you use?
Use the rule that the institution reading your result will accept. In order of trust:
- Your marksheet or transcript. Many print the conversion, sometimes in small type at the bottom.
- Your university’s regulations or website. Search for “CGPA to percentage” on the official site.
- The exam or admissions office. A short email gets you the rule in writing.
- The employer or university you are applying to. Some state the conversion they apply.
What about a CGPA out of 4.0?
Do not use the ×9.5 rule on a 4.0 scale. A CGPA of 3.5 out of 4.0 is nowhere near 33%. Universities on the 4.0 scale, including most in Pakistan, publish their own grade table and sometimes a marks range for each grade. There is no single conversion.
Find your university’s table on its GPA calculator page, or read how the two scales relate in CGPA full form and meaning.
Common mistakes
- Using ×9.5 on a 4.0 or 5.0 scale. That rule is only for a CGPA out of 10.
- Converting each SGPA, then averaging. Work out your CGPA first (see SGPA to CGPA), then convert it once.
- Assuming one rule fits every university. The same CGPA can map to different percentages.
- Rounding up for an application. Quote the figure your documents give, not a rounded one.
Frequently asked questions
How do I convert CGPA to percentage?
Multiply your CGPA (out of 10) by 9.5 if your institution follows the CBSE rule. For example, 8.2 × 9.5 = 77.9%. Some universities use a different rule, such as (CGPA − 0.75) × 10 at VTU, so check your own regulations.
How do I convert percentage to CGPA?
Divide the percentage by 9.5 under the CBSE rule. For example, 72% ÷ 9.5 = 7.58 CGPA. Under the VTU rule it is (percentage ÷ 10) + 0.75.
What is 8 CGPA in percentage?
Under the CBSE rule, 8 CGPA is 76%. Under the VTU rule it is 72.5%, and under the simple CGPA × 10 rule it is 80%. Your university's own rule decides which figure is correct for you.
Is the CGPA × 9.5 formula official for every university?
No. It is the CBSE rule and many colleges follow it, but each university can publish its own conversion. Always use the rule on your marksheet, transcript or regulations.
Can I convert a 4.0 CGPA to percentage?
There is no single formula. Universities on the 4.0 scale publish their own grade tables, and some give a marks range for each grade. Use your university's table rather than a general converter.
Keep reading
Last updated 6 November 2026. This guide explains the standard method; your university’s official regulations always take priority.
